Maintenance of circular knitting machine

1.Daily maintenance of circular knitting machine

  • Each production shift should clear away the yarn fluff on the machine and yarn creel. Keep the knitting parts and winding parts clean.
  • Each production shift should check the automatic stop device and safety device. If there’s any abnormal situation, should repair or replace immediately.
  • Check the positive yarn feeders, should adjust if any abnormal situation.
  • Check oiler glass of base plate and level tube of oil lubricator.
  1. Weekly maintenance of circular knitting machine
  • Clear up the yarn fluff in the yarn adjust wheel.
  • Check the belt tension of driving system to make sure the smooth of machine driving.
  • Check the fabric taken down system to make sure working in good performance.
  1. Three months maintenance of circular knitting machine
  • Dismantle the CAM boxes of machines and clear away the yarn fluff on CAM boxes.
  • Clean the dedusting fan and check the wind direction of fan.
  • clear up the yarn fluff from all electrical devices
  • Check the performance of all electrical devices(include auto stop device, safety alarm system and detector system)
  1. Half-year maintenance of circular knitting machine
  • Clean completely the dial and cylinder include needles and sinkers. If there’s any broken of needles and sinkers, should replace new ones immediately.
  • Clean oil lubricator and check the vitta.
  • Clean and check the positive yarn storage feeders.
  • Clear away the yarn fluff and oil in the motor and driving system.
  • Check the vitta of used oil collection to make sure it’s unblocked

Leave a Reply

Your email address will not be published. Required fields are marked *

20Feb 2023
knitted stitch circular knitting machine

Weft knitted stitches from circular knitting machines described so far have been composed entirely of knitted loops. A knitted loop stitch is produced when a needle receives a new loop and knocks over the old loop that it held from the previous knitting cycle. The old loop then becomes a needle loop of normal configuration. […]

28Dec 2017
BUEN-KNIT LINKS JACQUARD FABRIC

Changes of dimension after knitting can create major problems in garments and fabrics, expecially those produced from hydrophilic fibers such as wool and cotton.Articles knitted from synthetic thermoplastic fibers such as nylon and polyester can be heat-set to a shape or to dimensions that are retained unless the setting conditions are exceeded during washing and […]

14Nov 2017
Chiffon knitted fabric on circular knitting machine

Chiffon knitted fabric on circular knitting machine, also known as georgette (from France georgette), georgette, is a strong twist crepe, crepe weave a silk fabric. Warp and weft with S twisting and Z twisting two different twist strong grab yarn, according to 2S, 2Z arranged between the phases to plain weave, the weft density of […]

11Nov 2017
Computerised Jacquard Circular Knitting Machine

Computerised Jacquard Circular Knitting Machine offer the decisive advantages of convenient power-supply, compatibility with existing mechanical components, mirco-miniaturisation of circuitry, and economical data storage. In addition, computerised system do not require to be of a size proportionate to their task or to operate on a one-to-one ralationship with it. Computerised selection or machine control is […]

13Aug 2016
sinkers for knitting machine

The sinkers for knitting machine is the second primary knitting element(the needle being the first). It is a thin metal plate with an individual or a collective action operating approximately at right angles from the hook side of the needle bed, between adjacent needles.  It may perform one or more of the following functions, dependent […]

  • 4 + 14 =
error: Content is protected !!